- Induction Soldering fabric to kovar tip Type:
Class: Induction SolderingIntro: Soldering fabric to kovar tip Material Kovar cone, base 3/8” (9.5mm) dia, cone 3/8” (9.5mm) high, solderTemperature 300 F (149 C)Frequency 242 kHzEquipment • Power of 3.2 kW induction heating system, equipped with a remote workhead containing one 1…
- Induction Soldering connectors together Type:
Class: Induction SolderingIntro: Soldering connectors together Objective Soldering two connectors simultaneously to a tin plated copper ground plateMaterial Tin plated copper ground plate 4” x 1.75” (101.6mm x 44.45mm), 2 connectors, one with12 pins & one with 4 pins and 60/40 …
- Induction Soldering stainless steel Type:
Class: Induction SolderingIntro: Soldering stainless steel Objective Heat Stainless steel connector for soldering application in automotive wire harness manufacturingMaterial Stainless steel connector 1.57” (40mm) long, 0.6” (15mm) OD & 0.4” (10mm) thick. Lead free solderTempe…
- Induction Soldering LED to aluminum housing Type:
Class: Induction SolderingIntro: Soldering LED to aluminum housing Objective Heat an aluminum spotlight housing to solder an LED assembly to the inside baseMaterial LED housing with copper plug, aluminum spotlight housing 5” (127mm) dia at top, 1.25” (31.75mm) dia at base, temperat…
- Induction Soldering Glass Feedthroughs Type:
Class: Induction SolderingIntro: Soldering Glass Feedthroughs Objective Heat a kovar fiber optic housing with glass feed-throughs to 400F (204.4C) within 20 seconds for a soldering application, to form a hermetic seal Material Kovar housing with 18 glass feed-throughs, solder preform…
- Induction Soldering Ferrule to Fiber Optic Cable Type:
Class: Induction SolderingIntro: Soldering Ferrule to Fiber Optic Cable Objective To heat a gold-plated ferrule and fiber optic cable to 475F within 8 seconds for a soldering applicationMaterial Gold-plated ferrule tube, fiber optic cable, solder preformTemperature 475 FFrequency 270…
- Induction Soldering Fiber Optic Type:
Class: Induction SolderingIntro: Soldering Fiber Optic Objective To heat a fiber optic housing to 400F within 10 seconds for avsoldering application, to form a hermetic sealMaterial Gold-plated aluminum housing, solder preform ring and fluxTemperature 400 FFrequency 267 kHzEquipment …
- Induction soldering solar panel Type:
Class: Induction SolderingIntro: soldering solar panel Objective Heat multiple joints on solar flex circuit strips to 500F (260C) within ten seconds for a soldering application.Material Flexible solar panel, Solder Plus Paste 63NC-A, 0.0625” (1.59mm) thick Teflon sheetsTemperature 5…
- Induction Soldering brass rings Type:
Class: HF Induction Brass SolderIntro: Soldering brass rings Objective: To heat 1 3/4, 3 and 6 diameter brass slip rings and a sheathed copper wire assembly to 3600 F for soldering within three (3) to six (6) seconds. Currently production is accomplished by using a soldering iron and stick…
- Induction Soldering Brass Bellows Assembly Type:
Class: HF Induction Brass SolderIntro: Soldering Brass Bellows Assembly Objective: To heat a brass bellows and end cap assembly to 450F for soldering within 20 seconds. Presently, a soldering iron is used to produce the joint between the bellows and cap. The customer requests a quality sol…
Recommended
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel knife
induction deicing for aircraft carrier,naval vessels, naval craft, naval ships and boats, warship