Induction Heating Graphite Susceptor
Views Send Enquiry
Heating Graphite Susceptor
Objective
To Heat a graphite susceptor to 1100°C in an inert atmosphere of Nitrogen and Hydrogen. The susceptor is to be used for metal oxide chemical vapor deposition (MOCVD) crystal growth experiments. Verification of temperature reached is critical.
Material Graphite Susceptor measuring 3″ in diameter and 1 1/4″ thick.
Temperature 1100°C
Frequency 171 kHz
Equipment Power of 30KW solid state induction power supply including one (1) remote heat station containing two (2) 1.0 μF capacitors and a high voltage transformer, and a four (4) turn helical coil with a 5″ inside diameter and a length of 1 1/2″.
Process The Power of 30KW solid state induction power supply with a four (4) turn helical coil and a two color IR optical pyrometer were used to achieve the following results:
Results • 1100°C was reached in five (5) minutes as read from the two color IR optical pyrometer.
• An even heat pattern was observed.
Related Content
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel plate by pancake induction coil
induction heating steel knife
Hot
induction painting after induction bending for pipelines
induction heating steel plate
induction remove copper from aluminium
induction heating stator frame
induction heating graphite mould
difference between induction heating inner surface and outside surface of steel ring
induction heating steel pot bottom
induction heating for heat preservation
Newest Comment
No Comment
Post Comment