induction preheating oil drilling shaft

Preheating oil drilling shaft Objective To preheat a steel pipe to 500F (260C) before welding.Material Steel shaft assembly 5” to 8” OD (127-203.2mm) with a 2” (50.8mm) heat zone.Temperature 500F (260C), if higher temperatures are required, heat time ca…

induction heating motor

Heating motor Objective Heat steel to help bond an injection molded piece and help the reflow.Material Steel motor body, 60 x 60 x 27 (2.4 x 2.4 x 1.1) mm(in)Temperature 260C (500F)Frequency 237 kHzEquipment • Power of 20kW induction heating system, equip…

induction heat braided cable

Heat braided cable Objective Prior to cutting, heat a short section of a hardened steel cable coated with a polyethylene sheathing.Material Multi-strand braided stainless steel cable 0.5 in. (1.27 cm) OD enclosed within a polyethylene sheathingTemperature …

induction heat the end of catalytic converter

Heat the end of catalytic converter Objective Heat the end of lorry catalytic converter exhaust system. The assembly must be held at target temperature for 200 hours, whilst the assembly is vibrated to test the weld strength.Material SteelTemperature 842 –…

induction heat the plough discs

Heat the plough discs Objective To heat the circumference of plough discs before hot rolling (sharpening) processMaterial Flat Boron steel discs, OD 460 to 710 mm (18 to 28”) thickness 3.2 to 10 mm (8/64 to 25/64”)Temperature 725C 1335FFrequency 75 kHzEq…

induction heating steel rivets

Heating steel rivets Objective Heating steel rivets prior to head formingMaterial steelTemperature 1292 F (700C)Frequency 83 kHzEquipment • Power of 7 kW induction heating system, equipped with a remote workhead containing one 1.5μF capacitor.• An induc…

induction heat seat springs for powder coat

Heat seat springs for powder coat Objective Heat the steel spring assemblies of automotive seats to powder coatMaterial Steel wire springs ~24” (61 cm) long, 1/8 “ (3.175mm) diameter cross sectionTemperature 500 F (250 C)Frequency 57 kHzEquipment Power …

induction heat aluminum molds

Heat aluminum molds Objective Heat aluminum cake molds to release baked food productsMaterial Aluminum molds 4.5” (11.4 cm) diameterTemperature 302 F (150 C)Frequency 65 kHzEquipment Power of 70kW, induction heating system, equipped with a remote heat s…

induction heat pliers

Heat pliers Objective Heat pliers for final shaping of the handlesMaterial Steel pliers handles 5” (12.7 cm) long; 0.14” (3.56mm) thickTemperature 1200F (649 C)Frequency 199 kHzEquipment Power of 6kW induction heating system, equipped with a remote heat …

induction heat steel plates

Heat steel plates Objective Heat steel plates on conveyor system in order to cook Welsh cakes.Material Steel plate 760 x 440 x 10mm (29.9 x 17.3 x 0.4 in.)Temperature 200 C (392 F)Frequency 87 kHzEquipment Power of 100kW induction heating system, equipped …