Induction HARDENING

UIHM (Ultra) High Frequency induction heating machines are good for quenching work, it will bring a faster speed, higher temperature, small thickness and wonderful hardness.induction hardening

Induction HARDENING for hardware tools

induction hardening for hardware tools

auto Induction HARDENING

auto induction hardening

what is Induction HARDENING

induction hardeningPrincipal methodsSingle shot hardeningIn single shot systems the component is held statically or rotated in the coil and the whole area to be treated is heated simultaneously for a pre-set time followed by either a flood quench or a drop…

Induction HARDENING of bearing parts

INDUCTION HARDENING OF BEARING PARTS It is known that induction heating is effective in flow-line mass production that precludesresetting of equipment, or in individual production where the application of ordinaryheating methods is difficult.Induction hard…

Induction HARDENING teeth of gear

Objective Hardening teeth on a steel motorcycle gear to a hardness of 48 – 55 HRC Material Carbon steel gear 6.9” (175mm) diameter Temperature 2000 F ( 1093 C) Frequency 78 kHz Equipment •Power of 90 kW induction heating system, equipped with a remo…

Induction HARDENING surgical blades

Objective To quickly heat a steel surgical blade to 2000F (1093C) within 2 seconds so as to harden the blade edge. Material Stainless steel surgical blades, temperature sensing paint Temperature 2000F (1093C) Frequency 339kHz Equipment Power of 6kW ind…

Induction HARDENING applications

UIHM induction surface hardening applications one application: under torsion and bending load of the alternating workpieces requiring surface layer under the Ministry of higher stress than the heart or abrasion on the surface to be made to strengthen the d…

Induction HARDENING belt retraction gear

Objective Heat the teeth of a soft steel seatbelt retraction gear to 1700F (926.7C) within two seconds for hardening. Material #4130 steel seatbelt retraction gears, water vortex quenching tank, electronically controlled air valves, adjustable timers Tem…

Induction HARDENING bed knife blade

Objective Harden a selected area on an 18″(457.2mm) bed knife blade for a reel type lawn mower. The hardness desired is between 45 to 55 Rockwell C, and should be measured 0.062″(1.6mm) from the cutting edge. Material 1070 Steel Bed Knife Blade measurin…