Induction Hardening Teeth Of Gear
Views Send Enquiry
Objective Hardening teeth on a steel motorcycle gear to a hardness of 48 – 55 HRC
Material Carbon steel gear 6.9” (175mm) diameter
Temperature 2000 ºF ( 1093 ºC)
Frequency 78 kHz
Equipment •Power of 90 kW induction heating system, equipped with a remote workhead containing eight 1.0μF capacitors for a total of 8μF
• An induction heating coil designed and developed specifically for this application.
Process A single turn helical coil is used to heat the gear. The gear is placed on a spindle and rotated at 300-350 RPM’s. Heat is applied for 10 seconds to reach the desired hardness. The gear is immediately quenched to remove the heat, dried and then coated with a lubricant.
Results/Benefits Induction heating provides:
• Easy control of depth of hardness
• Energy savings due to efficiency of process
• Hands-free heating that involves no operator skill for manufacturing
• Even distribution of heating
hardening-gear-teech
Related Content
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel plate by pancake induction coil
induction heating steel knife
Hot
induction hardening surface of steel plate
induction hardening gear surface
induction hardening wheel gears
induction hardening TCT knife (tungsten carbide tool)
induction hardening knife edge (sickle blade)
induction hardening inner surface of steel pipe
induction hardening inner surface of steel ring by UHF induction heater
induction hardening inner surface of gear
Newest Comment
No Comment
Post Comment