- induction quenching head and end part of steel rod (axle) Type:
Class: HF Induction QuenchingIntro: induction quenching head and end part of steel rod (axle)
- install air-cooled clamp coil for preheating pipeline Type:
Class: Induction Tempering or PreheatingIntro: install air-cooled clamp coil for preheating pipelineair cooled clamp coil for preheating oil pipelineair-cooled clamp coil for heating oil pipeline
- Releasing Fixture by Induction Heating Type:
Class: Other Induction ApplicationsIntro: Objective A fixture used in lens grinding uses a metallic bond to secure the glass form to the fixture during grinding. Induction is used to release the lens from the bonding materialMaterial bonded grinding fixtures; Teflon-coated helical coilTemperature
- Remove plastic coating from steel tubes by Induction Heating Type:
Class: Other Induction ApplicationsIntro: Objective Recover the polypropylene insulation from hollow steel tubes to allow recycling of both the tubes and the insulation. Material Hollow steel tubes 1/8” (0.318 cm) to 5/8” (1.59 cm) IDProtective polypropylene coating Temperature 150 C (302F…
- Crucible melting various materials in nitrogen atmosphere Type:
Class: Induction MeltingIntro: Objective Heat to melting point various materials in a nitrogen atmosphere in a graphite or molybdenum crucible.Material Magnesium fluoride, tantalum pentoxide, aluminum, yttrium fluoride, germanium, hafnium or titanium dioxide and a Pyrex bell jar Tempe
- Induction Heating catheter tipping die Type:
Class: Other Induction ApplicationsIntro: Objective Water-cooled brass mandrel die, nylon LDPE catheter, “K” type thermocouple and temperature controller.Material materials, supplies involved in the applicationTemperature 400F (204C)Frequency 325kHzEquipment 14KW induction heating system, remote…
- Induction Molding for teflon catheter tip Type:
Class: Other Induction ApplicationsIntro: Objective Heat a water-cooled steel mandrel to 700F (371C) to form a high quality Teflon catheter tip.Material Teflon catheter tubing, mandrel assemblyTemperature 600-700F (315-371C)Frequency 376 kHzEquipment 6 KW induction heating system, equipped with a
- Induction heating for Plastic Reflow With Catheter Tubing Type:
Class: Induction Thermal TreatmentIntro: Objective Heat a metal braid in a plastic catheter tube to 250F (121.1C) so that another catheter tube can be bonded to it. Material 0.05” (1.27mm)diameter catheter tubes, some with a metal braid, ceramic rod Temperature 250F(121.1C) Frequency 306kHz Equi
- induction welding automotive stainless plate for Toyato Type:
Class: Induction WeldingIntro:
- induction quenching axle (shaft) by 160KW induction heater Type:
Class: Induction HardeningIntro: induction quenching axle (shaft) by 160KW induction heater
Recommended
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel knife
induction deicing for aircraft carrier,naval vessels, naval craft, naval ships and boats, warship