Intro: induction hardening HDTV rotating bodies made with the rotation of hardened parts. Long parts hardened inductor in series with the movement along the axis of the member. Cooling the workpiece immediately after the heating is performed by jets of water or

Intro: Induction hardening is a form of heat treatment in which a metal part is heated by induction heating and then quenched. The quenched metal undergoes a martensitic transformation, increasing the hardness and brittleness of the part. Induction hardening is

Intro: induction hardening for hardware tools

Intro: auto induction hardening

Intro: INDUCTION HARDENING OF BEARING PARTS It is known that induction heating is effective in flow-line mass production that precludesresetting of equipment, or in individual production where the application of ordinaryheating methods is difficult.Induction…

Intro: Objective Hardening teeth on a steel motorcycle gear to a hardness of 48 – 55 HRCMaterial Carbon steel gear 6.9” (175mm) diameterTemperature 2000 F ( 1093 C)Frequency 78 kHzEquipment •UM-HF-90 kW induction heating system, equipped with a remote workhead…

Intro: Objective To quickly heat a steel surgical blade to 2000F (1093C) within 2 seconds so as to harden the blade edge.Material Stainless steel surgical blades, temperature sensing paintTemperature 2000F (1093C)Frequency 339kHzEquipment UM-UHF-6kW induction he

Intro: UIHM induction surface hardening applications one application: under torsion and bending load of the alternating workpieces requiring surface layer under the Ministry of higher stress than the heart or abrasion on the surface to be made to strengthen the

Intro: Objective Heat the teeth of a soft steel seatbelt retraction gear to 1700F (926.7C) within two seconds for hardening.Material #4130 steel seatbelt retraction gears, water vortex quenching tank, electronically controlled air valves, adjustable timersTemper

Intro: Objective Harden a selected area on an 18″(457.2mm) bed knife blade for a reel type lawn mower. The hardness desired is between 45 to 55 Rockwell C, and should be measured 0.062″(1.6mm) from the cutting edge.Material 1070 Steel Bed Knife Blade measuring …