induction heating engine head

Heating engine head Objective Heat steel liners on the head of an engine to remove aluminium casing. Material Steel, 80 mm ID x 190 mm (3.1 in x 7.5 in.) Temperature 650 C (1202 F) Frequency 81 kHz Equipment Power of 35kW induction heating system, …

induction heating aluminium susceptor

Heating aluminium susceptor Objective Expand powder into solid form for use in crash helmetsMaterial Microspheric powderAluminium chamber 110mm (4.3 in.) diameter x 35mm (1.3 in.) deep used to hold powderTemperature 150 oC (302 oF)Frequency 54.5 kHzProcess…

induction heating titanium blade

Heating Titanium Blade Objective Heat a titanium blade to 500F (200C) to melt and drain the wax from inside the blade.Material 4” length (101.6mm) titanium blades with 1.5” x 0.25” (38.1mm x 6.4mm) metering areaTemperature 500F (200C)Frequency 186 kHzEq…

induction heating engine valve

Heating Engine Valve Objective To heat the face of an engine valve head to 900F and maintain the temperature for an extended time, hightemperature stress test.Material Engine valve head (two sizes), temperature sensing paintTemperature 900 FFrequency 223 k…

induction pre-heating truck axle

Pre-heating Truck Axle Objective To pre-heat the seam of a truck axle to over 300F within 15 seconds for a welding application and maintain temperature within the welding zone for 15 seconds after the power isturned off.Material Steel truck axle; 350 and 4…

induction heating eight steel rods

Heating Eight Steel Rods Objective Heat eight steel rods simultaneously to 212F (100C) for a molding operation.Material 8 Steel Rods measuring 1/2 (12.7mm) in diameter and 14 (355.6mm) long held in place by 2.5” (63.5mm) diameter Teflon end plates.Tempera…

induction melting furnaces

Melting Furnaces Characteristics of cast iron to a large extent depend on the content of harmful impurities and, above all, of sulfur. For modifications to the high-strength nodular cast iron should have a low sulfur content. In cupola furnaces to smel…

induction heat treating process

Heat treating process Heat treating is an essential phenomenon that is very much needed to manipulate the physical, as well as sometimes the chemical properties of a metal. Though it finds its application in the metallurgical process, heat treating is also…

induction heating carbon graphite anodes

Heating carbon graphite anodes Objective Heating carbon graphite anodes to destructively oxidize the parts to process embedded contaminantsMaterial anodes 2.5 x 2.5 x 4 (63 x 63 x 102) h x w x d in (mm)Temperature 1900 F 1000CFrequency 54 kHzEquipment Powe…

what is induction hardening

induction hardeningPrincipal methodsSingle shot hardeningIn single shot systems the component is held statically or rotated in the coil and the whole area to be treated is heated simultaneously for a pre-set time followed by either a flood quench or a drop…