- Induction Soldering brass Type:
Class: HF Induction Brass SolderIntro: Soldering brass Objective To solder a brass end cap to a series of copper tubesMaterial Preassembled heat exchanger with copper tubes and 2 brass end caps 2.36” (60mm) OD, 0.08” to 0.12” (2 to 3mm) thick at both ends, liquid solderTemperature 302F …
- Induction Soldering brass and copper Type:
Class: HF Induction Brass SolderIntro: Soldering brass and copper Objective To heat brass and copper for soldering application on medical equipmentMaterial Brass ring, brass and copper pieces 5.11” (130mm) long, 4.3” (110mm) OD & 0.3” (7mm) at thickest point and solder ringsTemperat…
- Induction Soldering brass rings Type:
Class: HF Induction Brass SolderIntro: Soldering brass rings Objective: To heat 1 3/4, 3 and 6 diameter brass slip rings and a sheathed copper wire assembly to 3600 F for soldering within three (3) to six (6) seconds. Currently production is accomplished by using a soldering iron and stick…
- Induction Soldering Brass Bellows Assembly Type:
Class: HF Induction Brass SolderIntro: Soldering Brass Bellows Assembly Objective: To heat a brass bellows and end cap assembly to 450F for soldering within 20 seconds. Presently, a soldering iron is used to produce the joint between the bellows and cap. The customer requests a quality sol…
- Induction Soldering brass tubes Type:
Class: HF Induction Brass SolderIntro: Soldering brass tubes Objective: Soldering two brass tubes measuring 3/4 and 1/4 together for use as cellular phone antennas. The lengths of tubes range from four (4) feet to twelve (12) feet, and must be soldered along the axial side. The joint is to…
- Induction Solder Flex Circuits Type:
Class: HF Induction BrazingIntro: Solder Flex Circuits Objective To heat multiple joints on flex circuit strips to 180-200F within seven seconds for a soldering application.Material Copper bonded to polyester flex circuit strips, Solder Plus Paste 63NC-A, 0.0625” thick Teflon sheetsT…
- Induction Heat Television Picture Tube Glass Type:
Class: HF Induction BrazingIntro: Heat Television Picture Tube Glass Objective: The incorporation of solid state RF induction heating into the television picture tube industry, specifically the insertion of attachment pins into the already formed picture tube glass panel. Four pins ar…
- Induction Brazing carbide to steel shaft Type:
Class: HF Induction BrazingIntro: Objective Brazing a cone shaped carbide to a stainless steel shaft for a diggerMaterial Cone shaped carbide 1.12” (28.4mm) dia, 1.5”(38.1mm) tall, stainless steel shaft 1.12” (28.4mm) dia and various length, black brazing flux and braze shimsTemperature…
- Induction Brazing thin walled tube Type:
Class: HF Induction BrazingIntro: Objective Braze a NI-SPAN-C alloy tube to a steel cap in a hydrogen atmosphereMaterial NI-SPAN-C alloy tube (5mm) dia, steel cap (7mm) dia, (7mm) long, nickel braze, quartz tube and hydrogenTemperature 1875 F (1024 C)Frequency 313 kHzEquipment • UM-UHF-20
- Induction Brazing piston valve Type:
Class: HF Induction BrazingIntro: Objective Brazing a steel piston valve assemblyMaterial Steel piston valve 4.5” dia (11.43cm), tungsten carbide plate and brazeTemperature 1350 FFrequency 91 kHzEquipment • UM-HF-90kW induction heating system, equipped with a remote workhead containing s…
Recommended
induction brazing SS steel by handheld induction coil
induction brazing shoe mold
air cooled mini handheld 1KW induction heater for heating screws
induction brazing Fiber Interface by UHF machine
induction brass soldering pipes for chiller
induction brass soldering for multi pipes
High frequency induction brazing welding steel bar
induction brass solder brazing or welding