- Induction Brazing Turbine Blades Type:
Class: HF Induction BrazingIntro: Objective To heat an inconel turbine blade in a vacuum to 2000F and hold temperature for five minutes for a nickel brazing application.Material Inconel turbine blades, nickel metering plates, nickel brazeTemperature 2050FFrequency 20 kHzEquipment ABS Mark
- Induction Brazing Steel Fitting Type:
Class: HF Induction BrazingIntro: Objective To heat a steel hydraulic hose fitting in an inert atmosphere to 2200F within 7 seconds for brazing without any carbon buildup.Material Three-opening steel hydraulic fitting, pure copper braze pasteTemperature 2200FFrequency 273 kHzEquipment UM-
- Induction Brazing Steel Conduit Type:
Class: HF Induction BrazingIntro: Objective To heat a stainless steel conduit, ferrule and elbow assembly to 1400F (760C) within 20 seconds for brazing.Material 6”(152.4mm)long x 0.5”(12.7mm) diameter stainless steel conduit, 0.5”(12.7mm) long x 0.5”(12.7mm) diameter ferrule, 2”(50.8m…
- Mult Induction Brazing Process Type:
Class: HF Induction BrazingIntro: Brazing process exudes fumes, emissions and radiations that may be harmful for the people involved in conducting and managing. The people working in this industry are exposed to gases and harmful radiations that are exuded by the brazing of the base metal
- Induction Brazing a carbide to a stainless steel shaft Type:
Class: HF Induction BrazingIntro: Objective : Brazing a cone shaped carbide to a stainless steel shaft for a diggerMaterial : Cone shaped carbide 1.12” (28.4mm) dia, 1.5”(38.1mm) tall,stainless steel shaft 1.12” (28.4mm) dia and various length, black brazing flux and braze shimsTemperat…
- introduction of brazing Type:
Class: HF Induction BrazingIntro: What is brazing?The term “brazing” can be applied to any process which joins metals (of the same or dissimilar composition)through the use of heat and a filler metal with a melting temperature above 840 F (450 C), but below the melting point of the meta…
- Induction Soldering Steel to Brass Type:
Class: HF Induction Brass SolderIntro: ObjectiveHeat an assembly of small, gold-plated steel connectors to a brass block.Approx. 1/8” (3.2mm) diameter gold-plated steel connectors,1”(25.4mm) square x 1/4” thick brass block ,600F(315.6C),240 kHzTemperature,Frequency,Equipment6 kW induction he…
- This illustration shows how the connecting sleeve of a plate heat exchanger is inductively brazed on Type:
Class: HF Induction Brass SolderIntro: This illustration shows how the connecting sleeve of a plate heat exchanger is inductively brazed on
- induction brass soldering radiator (heat sink)_2 Type:
Class: HF Induction Brass SolderIntro: induction brass soldering radiator (heat sink)_2
- induction brazing conducting rod of turbine Type:
Class: HF Induction BrazingIntro: induction brazing conducting rod of turbine
Recommended
induction brazing SS steel by handheld induction coil
induction brazing shoe mold
air cooled mini handheld 1KW induction heater for heating screws
induction brazing Fiber Interface by UHF machine
induction brass soldering pipes for chiller
induction brass soldering for multi pipes
High frequency induction brazing welding steel bar
induction brass solder brazing or welding