induction heating applications show 3

induction Heating is very popular for various of applications such as Annealing Bonding, Rubber/Metal Brazing , Cap Sealing ,Carbide Tipping, Catheter Tipping ,Crystal Pulling , Curing , Forging ,Getter Firing , Hardening , Heat Treating , Hot Forming ,Le…

induction heating applications show 2

induction Heating is very popular for various of applications such as Annealing Bonding, Rubber/Metal Brazing , Cap Sealing ,Carbide Tipping, Catheter Tipping ,Crystal Pulling , Curing , Forging ,Getter Firing , Hardening , Heat Treating , Hot Forming ,Le…

induction heating applications show 1

induction Heating is very popular for various of applications such as Annealing Bonding, Rubber/Metal Brazing , Cap Sealing ,Carbide Tipping, Catheter Tipping ,Crystal Pulling , Curing , Forging ,Getter Firing , Hardening , Heat Treating , Hot Forming ,Le…

base details of high frequency induction heating

Introduction Induction heating is a non-contact heating process. It uses high frequency electricity to heat materials that are electrically conductive. Since it is non-contact, the heating process does not contaminate the material being heated. It…

induction heating six wire bundles

Heating six wire bundles Objective Heating the ends of six wires on a starter motor to remove the electrical varnishesMaterial Starter motor with six wire bundles, each wire consists of 3wires 0.04” (1.0mm) diameter eachTemperature 1202 F (650 C)Frequency…

induction heating nitinol spring

Heating Nitinol spring Objective To heat a nitinol spring assembly to 800F (426.6C) for shape setting applicationMaterial 0.018” (.457mm) Nitinol wire wrapped around a 0.08” (2.03mm) Nitinol mandrel 15” (381mm) longTemperature 800F (426.6C)Frequency 270…

research the heating effects

Research the heating effects Objective Heating stainless steel disc & tantalum disc to 1400F (760C)Material Stainless steel and tantalum discs approx 1/2” (12.7mm) diameter. End product is radioactivity counting plateTemperature 1400 F (760C)Frequency…

induction preheating oil drilling shaft

Preheating oil drilling shaft Objective To preheat a steel pipe to 500F (260C) before welding.Material Steel shaft assembly 5” to 8” OD (127-203.2mm) with a 2” (50.8mm) heat zone.Temperature 500F (260C), if higher temperatures are required, heat time ca…

induction heating motor

Heating motor Objective Heat steel to help bond an injection molded piece and help the reflow.Material Steel motor body, 60 x 60 x 27 (2.4 x 2.4 x 1.1) mm(in)Temperature 260C (500F)Frequency 237 kHzEquipment • Power of 20kW induction heating system, equip…

induction heating steel rivets

Heating steel rivets Objective Heating steel rivets prior to head formingMaterial steelTemperature 1292 F (700C)Frequency 83 kHzEquipment • Power of 7 kW induction heating system, equipped with a remote workhead containing one 1.5μF capacitor.• An induc…