-
Keywords"SS steel",total
56 records
-
induction preheating for seamleSS steel tube before jointing by 40kw induction heater um-40ab-mf
-
induction annealing an oval cut out on a stainleSS steel tube
Objective To anneal a area around an oval cutout on a stainless steel tube prior to extrusionMaterial:.75" (19mm), 1.5" (38.1mm) and 4" (101.6mm) diameter steel tubesTemperature: 1900 F ( 1038 C)Frequency: 50KHzEquipment:• UM-60AB-HF induct…
-
frequency induction heating equipment and quenching machine stainleSS steel quenching
Our UM-100AB-RF super audio induction heating equipment and quenching machine on the quenching diameter 70mm, length 600mm shaft quenching, material: 45 #, hardness depth of 2 mm, hardness 50HRC quenching produced axis has a uniform surface hardness,less o…
-
high frequency induction heating equipment annealed stainleSS steel tube
UM-60AB-HF high frequency induction heating equipment for stainless steel pipe annealing (solution), annealed steel pipe weld can withstand the stress of bending, flattening, the weld will not crack, fast heating and high efficiency
-
custom build stainleSS steel water chiller
UIHM induction heaitng machine can be cooled by tap water from customer, but if you use the water chiller, it will be better.Stainless Steel Chiller[2]
-
induction brazing for stainleSS steel
induction brazing for stainless steel_1 induction brazing for stainless steel_2
-
induction soldering stainleSS steel
Soldering stainless steel Objective Heat Stainless steel connector for soldering application in automotive wire harness manufacturingMaterial Stainless steel connector 1.57” (40mm) long, 0.6” (15mm) OD & 0.4” (10mm) thick. Lead free solderTemperatur…
-
induction stainleSS steel hot forming
Objective: To heat a stainless steel “J” tape to 3000F from room temperature at a rate of 15 feet per minute. The material is to be heated to aid in forming the “J” shape from flat stock. Material: Stainless Steel “J” Tape measuring 0.562″ wide, 0.…
-
induction de-bonding stainleSS steel
Objective To separate bonded stainless steel / carbon fiber assemblies by heating tang, softening the adhesive bond Material Stainless steel and carbon fiber inserts Temperature 300 F (149C) Frequency 200 kHz Equipment • Power of 6kW induction heating…
-
induction bonding plastic sleeve to stainleSS steel handle
Objective Heating end of a stainless steel handle with a plastic sleeve coated with heat adhesive for a bonding applicationMaterial 1” (25mm) OD stainless steel handle 0.30” (7.6) thick covered with a plastic sleeve that is coated with a heat adhesive be…