induction brazing steel tube with copper ring

Objective To heat an oil suction assembly (steel tubing and filter cap) to 1,850F (1010C) within 15 seconds for a brazing application. Material 0.125” (3.2mm) diameter steel tube and filter cap assembly, high temperature brazing flux, copper ring. Tempe…

induction brazing turbine blades

Objective To heat an inconel turbine blade in a vacuum to 2000F and hold temperature for five minutes for a nickel brazing application. Material Inconel turbine blades, nickel metering plates, nickel braze Temperature 2050F Frequency 20 kHz Equipment A…

induction brazing steel fitting

Objective To heat a steel hydraulic hose fitting in an inert atmosphere to 2200F within 7 seconds for brazing without any carbon buildup. Material Three-opening steel hydraulic fitting, pure copper braze paste Temperature 2200F Frequency 273 kHz Equipm…

induction brazing steel conduit

Objective To heat a stainless steel conduit, ferrule and elbow assembly to 1400F (760C) within 20 seconds for brazing. Material 6”(152.4mm)long x 0.5”(12.7mm) diameter stainless steel conduit, 0.5”(12.7mm) long x 0.5”(12.7mm) diameter ferrule, 2”(50.…

induction annealing brazing wire

Objective: Anneal a brazing wire for preform production. Material :Copper Nickel Silver 2774 Alloy rod 0.070″ (1.8mm) diameter. Temperature 650F(343.3C) Frequency 281 kHz Equipment • UM-06A-UHF induction heating system equipped with a remote workhead…

how induction brazing works

Induction brazing is a process where two or more materials such as pipe are joined together with a molten space filler metal using an induction heating coil which delivers a very high temperature. The induction brazing process will involve temperature more…

mult induction brazing process

Brazing process exudes fumes, emissions and radiations that may be harmful for the people involved in conducting and managing. The people working in this industry are exposed to gases and harmful radiations that are exuded by the brazing of the base metals…

induction brazing a carbide to a stainless steel shaft

Objective : Brazing a cone shaped carbide to a stainless steel shaft for a digger Material : Cone shaped carbide 1.12” (28.4mm) dia, 1.5”(38.1mm) tall,stainless steel shaft 1.12” (28.4mm) dia and various length, black brazing flux and braze shims Temp…

why induction brazing is better

different induction brazing workInduction Brazing for Aviation Fan blades and blades for boxes, different parts for numerous components in hydraulic systems and fuel systemsInduction Automotive Brazing Copper or steel components like brake linings and …

introduction of brazing

What is brazing? The term “brazing” can be applied to any process which joins metals (of the same or dissimilar composition) through the use of heat and a filler metal with a melting temperature above 840 F (450 C), but below the melting point of the …