-
Keywords"on",total
2924 records
-
induction brazing copper tube & pipe
Objective Braze brass fitting with o-ring to various diameters of copper tube. Material Various copper tubes ranging from 3/8” to 7/8” diameter and 2-3’ long, female brass fittings with o-ring, silver solder rings and glass beaker. Temperature 1300 F …
-
induction brazing carbide teeth to steel pipe
Objective Brazing carbide teeth to a steel jaw in less than 5 minutes Material Steel pipe jaw, 0.5” (12.7mm) dia, 1.25” (31.75mm) long, 0.25” (6.35mm) thick carbide teeth, black flux and silver copper braze shims Temperature 1292F (700C) Frequency 25…
-
induction brazing bourdon tube
Objective To braze a thin copper oval tube to a brass fitting at 1400 F and to cap the other end of the copper tube with a brass plate.Material Brass fitting – 0.875 in2 and 2.5 in long (22mm2 x 64mm) Copper tube 0.01 in (0.254mm) wall Brass plate 0.10 i…
-
induction brazing brass fittings
Objective To heat brass tubing assemblies to 750C for a brazing application. The tubing diameter varies from 3 to 8 inches (76.2 to 203.2 mm) Material Brass tubing Brass flange Braze rings Braze flux Temperature 1382F (750C) Frequency …
-
induction brazing carbide shaft to steel tube
Objective Braze a carbide shaft to a steel tube Material Carbide shaft 1/8” to 1” diameter (varying sizes) Steel tube 3/8” to 1 ” OD Silver solder braze Temperature indicating paint Temperature 1400 F for 60 seconds Frequency 220 kHz Equipment Pow…
-
induction brazing diamond drill
Objective To braze diamond inserts to a steel drilling ringMaterial • steel ring and diamond inserts• Braze shim preform• FluxTemperature 1300 – 1350 (700 – 730) F (C)Frequency 68 kHzEquipment Power of 35 kW, induction heating system, equipp…
-
induction brazing carbide tool
Objective Braze carbide rotary file assemblies with uniform concentricity in an aerospace application Material • Carbide blank • High speed steel shank • Temperature indicating paint • Braze shim and black flux Temperature 1400F (760C) Frequency …
-
induction brazing cutting tool
Objective To braze cone and shaft for a cutting tool Material Customer supplied parts Temperature indicating paint Braze preforms Temperature 1300 – 1400 F (704 – 760 C) Frequency 235 kHz Equipment Power of 6 kW, 150-400 kHz induction h…
-
induction brazing copper fittings
Objective Copper ‘tees’ and ‘ells’ are to be brazed to the aluminum body of a refrigeration valveMaterial customer’s valvecopper fittingsbrazeTemperature 2550 F (1400C)Frequency 285 kHzEquipment Power of 15KW induction heating system including a workh…
-
induction brazing carbide tips
Objective Attaching carbide cutters to a steel meat cutter impeller Material carbide blocks; steel shank fitting Temperature 1400 F (760 C) Frequency 219 kHz Equipment Power of 30kW induction heating systems including: Induction heating coil …