-
Keywords"steel tube",total
13 records
-
induction annealing ss steel tube
-
induction jointing seamless steel tube by 500khz uhf induction heater
induction jointing seamless steel tube by 500KHz UHF induction heater (1)induction jointing seamless steel tube by 500KhZ UHF induction heater (2)
-
induction preheating for seamless steel tube before jointing by 40kw induction heater um-40ab-mf
-
remove plastic coating from steel tubes by induction heating
Objective Recover the polypropylene insulation from hollow steel tubes to allow recycling of both the tubes and the insulation. Material Hollow steel tubes 1/8” (0.318 cm) to 5/8” (1.59 cm) IDProtective polypropylene coating Temperature 150 C (302F…
-
induction bending steel tube for nuclear electric plant
induction bending steel tube for nuclear electric plant
-
induction annealing an oval cut out on a stainless steel tube
Objective To anneal a area around an oval cutout on a stainless steel tube prior to extrusionMaterial:.75" (19mm), 1.5" (38.1mm) and 4" (101.6mm) diameter steel tubesTemperature: 1900 F ( 1038 C)Frequency: 50KHzEquipment:• UM-60AB-HF induct…
-
high frequency induction heating equipment annealed stainless steel tube
UM-60AB-HF high frequency induction heating equipment for stainless steel pipe annealing (solution), annealed steel pipe weld can withstand the stress of bending, flattening, the weld will not crack, fast heating and high efficiency
-
induction soldering steel tube
Soldering Steel Tube Objective Heat a.125” (3.175mm) diameter stainless steel tube to a 1” diameter cylinder 1” (25.4mm) tall for a soldering applicationMaterial Stainless steel cylinder and tubeTemperature indicating paint Lead free solder preform ring…
-
induction shrink fit steel tube
Shrink Fit Steel Tube Objective Heating a steel tube to 500-1000F for a shrink-fitting application. Determine expansion (growth) of ID at varying temperatures.Material Steel tubes 7” OD x 4.75” ID x 5” heat zone Type ‘K’ thermocouple to measure temper…
-
induction brazing steel tube
Objective To braze a steel tube to a steel “T” fitting Material 1” (25.4mm) diameter steel tubing, steel fitting, braze slug and black flux Temperature 1400F (760C) Frequency 198 kHz Equipment • Power of 15kW induction heating system, equipped with…