Induction Heating engine head
Views Send Enquiry
Objective Heat steel liners on the head of an engine to remove aluminium casing.
Material Steel, 80 mm ID x 190 mm (3.1 in x 7.5 in.)
Temperature 650 ºC (1202 ºF)
Frequency 81 kHz
Equipment Power of 35kW induction heating system, equipped with a remote workhead containing one 2.6μF capacitor.
An induction heating coil designed and developed specifically for this application.
Process An internal 10 turn solenoid (bore) coil is used to heat the steel liner to 650 ºC (1202 ºF) in approximately two minutes.
Pressure is applied to the outer aluminium skin to loosen it from the steel. A four position coil can be used to heat 4 liners
simultaneously.
Results/Benefits Induction heating provides:
• Precise direct heat to disengage the aluminium quickly and cleanly. The aluminium casing is recycled and reused
thereby reducing scrap and cutting costs.
Heating engine head
Heating engine head
Related Content
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel plate by pancake induction coil
induction heating steel knife
Hot
induction painting after induction bending for pipelines
induction heating steel plate
induction remove copper from aluminium
induction heating stator frame
induction heating graphite mould
difference between induction heating inner surface and outside surface of steel ring
induction heating steel pot bottom
induction heating for heat preservation
Newest Comment
No Comment
Post Comment