Induction bonding Metal to plastic
Views Send Enquiry
Objective: Bond an aluminium mesh to a plastic beer keg
Material : Aluminium mesh
. Plastic keg 320 mm (12.5”) ID
Temperature 250 C (482 F)
Frequency 200 kHz
Equipment UM-10AB-UHF, induction heating system, equipped with a remote workhead containing two .33μF capacitors (for a total of .66 μF).
An induction heating coil designed and developed specifically for this application.
Process/Narrative A single-turn solenoid coil is placed around the assembled
beer keg and heated for 35 seconds as the keg is rotated.
Pressure is applied with a press on the top rim whilst the keg is
rotating, forming a seal between the aluminium mesh and the two halves of the beer keg.
Results/Benefits Induction heating provides:
. Quick, reliable, repeatable heat
. Localized, precision heat to the mesh area
Material : Aluminium mesh
. Plastic keg 320 mm (12.5”) ID
Temperature 250 C (482 F)
Frequency 200 kHz
Equipment UM-10AB-UHF, induction heating system, equipped with a remote workhead containing two .33μF capacitors (for a total of .66 μF).
An induction heating coil designed and developed specifically for this application.
Process/Narrative A single-turn solenoid coil is placed around the assembled
beer keg and heated for 35 seconds as the keg is rotated.
Pressure is applied with a press on the top rim whilst the keg is
rotating, forming a seal between the aluminium mesh and the two halves of the beer keg.
Results/Benefits Induction heating provides:
. Quick, reliable, repeatable heat
. Localized, precision heat to the mesh area
Good
Bad
Related Content
Remove plastic coating from steel tubes by Induction Heating
induction bonding for glass frit sealing and metal alloy
induction melting steel or rare metal
induction bonding camera lens
Induction Bonding Solar Panel Shingles
Tilting Melting Platinum Furnace
Medium frequency vacuum melting furnace
Metal to Plastic by Induction Bonding
Newest Comment
No Comment
Post Comment